Trailer electrical interface converts from 12 volt commercial standard 7 Pin SAE 560 to 24 volt military standard MS75021-2. This allows towing a military trailer with a commercial/civilian vehicle.
Converter is made in USA. We are an authorized factory distributor and the product includes a 2 year manufacture's warranty.
ETC 1224-7 Specifications:
Inputs: 12-14 Volts DC
Number of converters per unit: 6 (5 control lights, extra 1 allows for aux uses/electric brakes, see i/o listing below)
Output: 24 Volts DC
Output current capability on each of the 5 main converters: 10 Amps.
Output current capability on auxiliary converter: 15 Amps
Output power: 800 Watts max total
Overload and short circuit protection: electronically controlled
Efficiency: 90 percent typical
Aluminum housing with steel end caps.
Mounting holes (6) for 1/4 inch hardware.
Overall Length: 21-1/4 inches
Overall Height: 4-3/4 inches
Overall width: 8-11/16 inches
Sealed case protects against water and dust.
Input connector configuration:
Yellow- left turn/brake
Brown/Black- tail light/clearance light/license plate light
Green- right turn/brake
Blue- aux 1 input
Red- aux 2/ABS/brake lights in some applications
Output connector configuration:
A - not used
B - left turn/brake
C - not used
D, L - ground
E - tail lights/license plate light/clearance lights
F, H - not used
J - right turn/brake
K - aux 1
M - aux 2/ABS/brake lights in some applications (not used on most military trailers)
Input cable see p/n BE27072.
20 lb shipping weight